Solid Color Floors

Armovex Flooring

Solid Color Floors

The Armovex solid color floor system is hard to beat.

ARMOVEX FSX Primer 5 gallon pail in Medium Gray, the color coat of the solid color floor system
FSX Primer
ARMOVEX TCX Top Coat 5 gallon pail, the finish coat of the solid color floor system
TCX Top Coat
Simple system, simple solution, repeatable results to help scale your business.

Two coats. Spray or roll.

The Armovex solid color floor system is two coats: FSX Primer in your chosen color, then TCX Top Coat. Apply by spray or roller, with a quick dry and a fast return to service.

Spray or roll application

Apply FSX Primer evenly by spray, roller, or squeegee. Apply TCX Top Coat by spray, squeegee, or roller.

2 coats

Coat one is FSX Primer in color. Coat two is TCX Top Coat. That is the solid color system, start to finish.

No abrading between coats, new or old

No sanding or abrading is needed between coats, whether recoating a fresh coat or an older coating.

Open recoat window

Open recoat window. Recoat when the prior coat is dry — on a new coat or an older one.

Quick dry

FSX is dry in about 30 minutes at 70°F. TCX is usually dry to the touch in about 1 hour, depending on thickness, temperature, and humidity.

Fast return to service

After the top coat, the TCX technical data sheet lists foot traffic in 2–4 hours and vehicle traffic in 48 hours, depending on conditions.

No profile needed

The system is designed to bond to properly cleaned concrete with no profile needed. No etching or mechanical profiling is required.

10-Year Warranty

Solid color floors are backed by the same 10-Year Warranty as the Armovex flooring system.

The two-coat system

  1. 1. Concrete Properly cleaned substrate. No profile needed.
  2. 2. Coat 1: FSX Primer The color coat — the solid color layer.
  3. 3. Coat 2: TCX Top Coat The clear protective top coat.
Spray or roll No abrading between coats Open recoat window

FSX Primer is the color coat. It comes in clear or in standard colors. TCX Top Coat is the clear finish coat, applied after FSX is dry. Open recoat window. No abrading between coats, new or old.

ARMOVEX FSX Primer 5 gallon pail, Clear, Zero VOC penetrating concrete primer

Coat 1

FSX Primer

The color coat of the solid color system. Choose Clear, Light Gray, Medium Gray, Dark Gray, Tan, Black, or White. FSX is dry in about 30 minutes at 70°F. Then apply TCX. Open recoat window. No abrading between coats, new or old.

Shop FSX Primer
ARMOVEX TCX Top Coat 5 gallon pail, the finish coat for Armovex solid color floors

Coat 2

TCX Top Coat

The finish coat of the Armovex floor system. TCX is usually dry to the touch in about 1 hour, depending on thickness, temperature, and humidity. Apply by spray, squeegee, or roller.

Shop TCX Top Coat

Standard colors

FSX Primer is the color coat. Standard colors are Clear, Light Gray, Medium Gray, Dark Gray, Tan, Black, and White. Choose a color on the FSX product page.

Swatches are a guide to the standard color names. Always confirm the color on the product and a test area before coating a floor.

Interior and exterior

Approved for Exterior Use

100% approved for exterior use. Apply to exterior floors, patios, decks, and pool decks with confidence, backed by the same 10-Year Warranty.

No profile needed 2 coats No abrading between coats Open recoat window 10-Year Warranty Exterior approved

Ready to coat a solid color floor?

Shop the two system components, browse the Flooring collection, or request a quote.