THE INDUSTRY INSIDERS
WHO BECAME BELIEVERS

We've spent years deep in the concrete coatings industry—not just as installers, but working with 30+ coating companies simultaneously. We've witnessed every failure, heard every contractor complaint, and dealt with every disaster that happens on job sites.

We know the reality because we've lived it:

Grinders breaking down mid-job. A/B mismixes destroying expensive material. Contaminations creating fish eyes and bubbles. Delamination from missed recoat windows. Homeowners complaining about toxic fumes for months. Contractors throwing away 30-50% of mixed product. Installers destroying their backs hauling 1,200-pound equipment.

We watched good contractors struggle daily with these problems. We saw talented installers quit because the physical toll was too much. We witnessed profitable businesses barely break even due to material waste and equipment costs.

The frustration was universal: Why does installing a garage floor have to be this complicated?

The industry has used the same methods for 40 years. Grind the concrete. Mix Part A with Part B. Race against the pot life. Hope nothing goes wrong. It felt like a million things needed to go perfectly just to get a decent floor—and most clients only cared about the final appearance.

We knew there had to be a better way.

WHEN SKEPTICISM MET REALITY

The claims seemed too good to be true:
  • Bonds to concrete without grinding or acid etching
  • Single-component system (no A/B mixing, no pot life)
  • Unlimited recoat window (fix mistakes instantly)
  • Zero VOC emissions (completely odorless)
  • Works in occupied buildings without evacuation

As industry veterans, we were immediately skeptical. Every experienced coating professional knows grinding creates mechanical profiling for adhesion—that's just how concrete coatings work. A system that bonds without profiling? That defied everything we'd been taught.

But we tested it anyway.

We applied it to our shop floors. We subjected it to every abuse we could think of. We drove equipment over it. We dropped tools on it. We exposed it to chemicals. We waited. We inspected.

It didn't fail.

A year later, those test sections still looked perfect. No delamination. No peeling. No yellowing. The adhesion matched traditionally ground surfaces. The durability exceeded our expectations.

That's when we realized this wasn't an incremental improvement—it was a fundamental breakthrough.

THREE YEARS OF RIGOROUS TESTING

Having seen countless coating products fail in real-world applications, we refused to bring Armovex to market until we had absolute confidence. For three years, we tested, refined, and validated every aspect of the system.

Our testing was exhaustive:

  • Residential garages in extreme climates
  • Commercial warehouses with heavy forklift traffic
  • Data center installations with zero dust tolerance
  • Occupied buildings during business hours
  • Moisture mitigation scenarios
  • UV exposure for outdoor applications
  • Chemical resistance with automotive fluids

We installed floors ourselves. We trained contractors and monitored their results. We collected feedback, identified issues, and made refinements.

What we discovered:

  • 1,000 sq ft garages completing in 4 hours (versus 2 days with traditional epoxy)
  • Zero material waste due to unlimited pot life
  • Instant error correction with unlimited recoat window
  • Professional results from first-time DIY installers
  • Zero fume complaints from homeowners
  • Access to occupied building markets previously impossible to serve

The formula worked—not just in controlled conditions, but in the chaotic reality of real job sites.

OUR MISSION

After witnessing thousands of coating failures and contractor frustrations, our mission became clear:

Make professional concrete coatings simpler, faster, safer, and more profitable.

The industry didn't need another epoxy variant. It needed a fundamental rethinking of how concrete coatings should work. We wanted to eliminate the complications that turn quality installations into gambling.

Our design philosophy:
  • Remove failure points instead of managing them
  • Eliminate hazardous materials and processes
  • Make professional results accessible to everyone
  • Prioritize installer safety and quality of life
  • Deliver superior performance without complexity

Traditional coating systems force a trade-off: accept brutal labor and health hazards, or sacrifice quality and durability. Armovex refuses that compromise.

OUR COMMITMENT

We're not just selling coating products—we're partnering with contractors to build better businesses. Your success is our success.

How we support contractors:
  • Free sample kits—test it before buying
  • 10-year non-prorated warranty
  • Comprehensive training and installation videos
  • Technical support from actual installers
  • Same-day shipping
  • Honest communication

Over 800 professional contractors have switched to Armovex. They're reporting 50% reduction in installation time, 83% increase in profit per job, zero equipment rental expenses, and complete elimination of material waste.

These aren't marketing claims—these are real results from contractors who were as skeptical as we were initially.

THE INDUSTRY IS CHANGING

For 40 years, concrete coating contractors accepted grinding, mixing stress, toxic exposure, and material waste as the cost of doing business. That era is ending.

A new generation of contractors is discovering they can deliver superior results without destroying their bodies, breathing carcinogens, or throwing away profit. They're working smarter. They're making more money.

We didn't believe it was possible either—until we tested it, proved it, and watched hundreds of contractors transform their businesses with it.

Get your free sample kit. Test it yourself. See if we're telling the truth.

Questions? Call us: (801) 477-0515
M-F, 8 AM - 6 PM MST